Printing Instrument Configuration - HORIBA ABX Micros 60 User Manual

ABX Micros
Setting Autocleaning frequency
Main Menu
5- Setup
3- Special
Press the «Enter» key
Enter system default Password <123> (or the one defined by the operator).
Press the «Enter» key
4- Clean freq
Enter the number of the analysis cycles to be run before cleaning
Press the «Enter» key to save or press the «Esc» key to abort.

4.5. Printing Instrument Configuration

This sub-menu allows the operator to print out the internal Instrument settings from all the menus
which allow user intervention.
Printing Instrument Configuration
Main Menu
5- Setup
3- Special
Press the «Enter» key
Enter system default Password <123> (or the one defined by the operator).
Press the «Enter» key
5- Print Config
Press the «Enter» key to run the printout of the internal setup
The following information will be printed out as noted:
12 - RAB042FEN - User Manual -
60
ABX Micros 60