Introduction - HORIBA ABX Micros 60 User Manual

1.1. Declaration of conformity
◆
Latest version of the CE declaration of conformity for this instrument is available on www.horiba-
abx.com
1.2. Notice of liability
The information in this manual is distributed on an "As Is" basis, without warranty. While every pre-
caution has been taken in the preparation of this manual, HORIBA ABX will not assume any liability
to any persons or entities with respect to loss or damage, caused or alleged to be caused directly or
indirectly by not following the instructions contained in this manual, or by using the computer soft-
ware and hardware products described herein in a manner inconsistent with our product labeling.
1.3. Trademarks
Other product names mentioned within this publication may be trademarks or registered trademarks
of other companies.
1.4. Copyright ® 2005 by HORIBA ABX
All rights reserved. No part of this book may be reproduced or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written per-
mission of HORIBA ABX.
1.5. Potential hazards
To alert the operator of potentially hazardous conditions, one of the bold captioned headings which
are described below is provided wherever necessary throughout this text.
WARNING: Flags a procedure that if not followed properly, can prove to be ex-
tremely hazardous to either the operator or the environment or both.
CAUTION: Emphasizes an operating procedure that must be followed to avoid
possible damage to the instrument or erroneous test results.
NOTA: Emphasizes the important information especially helpful to the operator
before, during or after a specific operational function.
ABX Micros 60 - User Manual - RAB042FEN - 3

Introduction