Activate Bt Hid & Select Keyboard Type - CipherLab Cipher Lab 1560 User Manual

2.1.1 ACTIVATE BT HID & SELECT KEYBOARD TYPE
When BT HID interface is activated, you will have to select a keyboard type to complete
this setting. By default, BT HID is activated on the scanner, and the keyboard type is set
to PCAT (US).
1) Read the barcode above to activate BT HID and select a keyboard type.
2) Read the "Decimal
number of desired keyboard type.
3) Read the "Validate" barcode on the same page to complete this setting.
BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type
64 PCAT (US)
65 PCAT (French)
66 PCAT (German)
67 PCAT (Italy)
68 PCAT (Swedish)
69 PCAT (Norwegian)
70 PCAT (UK)
Value" barcode on page 227. Refer to the table below for the
Chapter 2
Activate BT HID &
Select Keyboard
Type...
No. Keyboard Type
71 PCAT (Belgium)
72 PCAT (Spanish)
73 PCAT (Portuguese)
74 PS55 A01-2 (Japanese)
75 User-defined table
76 PCAT (Turkish)
Update
Selecting Output Interface
55