Gs1-128 (Ean-128); Code Id Transmission; Field Separator (Gs Character) - CipherLab 1663 User Manual

4.10 GS1-128 (EAN-128)

Note: GS1-128 barcodes can be decoded only when this setting is enabled. However, for
1660 with firmware version no later than 1.30, GS1-128 barcodes are taken as
Code 128 when this setting is disabled.

4.10.1 CODE ID TRANSMISSION

Decide whether to include the Code ID ("

4.10.2 FIELD SEPARATOR (GS CHARACTER)

Decide whether to apply a field separator (to convert the
readable character).
18) Read the barcode above to enable field separator.
19) Read the "Hexadecimal
20) Read the "Validate" barcode to complete this setting.
Note: GS1-128 barcodes start with the
from other uses of Code 128.
GS1-128 barcodes.
") in the data being transmitted.
]C1
Value" barcode on page 220 for the desired character string.
FNC1
is also used to separate data fields in the
FNC1
Chapter 4 Change Symbology Settings
*Enable
Disable
Transmit Code ID
*Do Not Transmit
control character to human
FNC1
Enable Field
Separator...
control character to distinguish themselves
Update
131