Gs1 Formatting - CipherLab 2560 User Manual

2560 Series Barcode Scanner

4.10.3 GS1 FORMATTING

Decide whether to enable GS1 formatting for GS1-128.
4.10.4 APPLICATION ID MARK
Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
Read '00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
138
User Guide
Value" barcode on page 228 for the desired character string.
Enable
*Disable
AIMark1
AIMark2
Enter Setup