Table of Contents
Advertisement
Default Filename for FCOMP results
Filenaming convention in Fiber View
In Fiber View, the default filenaming rule is as follows:
[Fiber_Id][Fiber_Num]
Filenaming convention in Cable View
In Cable View, the filenaming convention is as follows:
[Cable_Id]
As soon as the Cable Id changes, the result table is cleared and the next tests are stored
with the new Cable Id name.
The table view can be modified in the Setup page (see
•
Filenaming
•
Auto Store
•
Report As
txt file
pdf file
json file
If all parameters are defined with No, only .fcpro proprietary file format will be
saved.
Copy File/Link To All key
Copy the File and Report menus/fields from FiberComplete PRO application to other
active functions. It is disabled for SmartConfig-based only applications such as Smart-
TEST, FTTH-SLM, FTTA-SLM & Enterprise-SLM.
FCOMP-PRO Configuration file
A pre-defined configuration (one configuration file defined in FCOMP saves both
FCOMP and Expert OTDR setup) can be loaded from the setup menu, or the current
configuration can be saved in a file.
Chapter 3 Loss test (bi-directional IL/ORL + Fault Finder)
The expected file name is displayed in grey under Filenaming.
Select Yes to store automatically the results according to the
filenaming settings. If a filename already exists, the user will be
prompted to overwrite the "old" result or discard the current
result and keep the "old" one.
Select the report format to be generated:
select Yes to generate a txt file of the results.
select Yes to generate a report in a pdf file.
select Yes to generate json file(s) compatible with VIAVI test
process automation (job manager and StrataSync cloud data
management system).
User Manual
FCOMP-PRO Configuration file
page
700MAN203 Rev. 007
23).
29
Advertisement
Table of Contents
