Overlay - Viavi SmartOTDR 100 User Manual

Profile selected
in the Setup page

Overlay

Fig. 24 Test results
A summary of test results is displayed on the right, upper part of the
screen.
– Zone A: Core zone: it is the area
surrounding the core
– Zone B: Cladding zone. It surrounds the
majority of the fiber cladding.
– Zone C: Epoxy ring.
– Zone D: Ferrule/Contact zone: it identi-
fies a portion of the ferrule near and
around the fiber
NOTE
To return to a Live Camera image, press the Camera key; or press
the Full Screen/Mosaic key view both the live image and a test result
simultaneously.
In Mosaic mode (see
only displays Pass or Fail information; the status of each zone is dis-
played only in full screen mode.
The Overlay key allows, when selected, to display the limits of each zone
and to display with colors the defaults on the image.
When the key is deselected, the zones and defaults are not graphically
identified.
This function is also available in Mosaic Mode (see
page 46).
User Manual 7SMART102 Rev002
Launching a test of the connector and fiber end-face
"Mosaic Mode" page
Chapter 6 Scope
Summary of
Test results
Test result in
High mag.
Zone D
Zone C
Zone B
Zone A
46), the result of the test
"Mosaic Mode" on
45