Connecting To The Ethernet Interface - YOKOGAWA WT310EH User Manual

4.3

Connecting to the Ethernet Interface

Connection Procedure
Connect a UTP (Unshielded Twisted-Pair) or STP (Shielded Twisted-Pair) cable that is connected to
a hub or other network device to the Ethernet port on the rear panel of this instrument.
Hub or router that supports 100BASE-TX/10BASE-T
WT310E/WT310EH
WT332E/WT333E
Ethernet port
Notes on Connection
• To connect this instrument to a PC, be sure to use straight cables and to connect through a hub
or router. Proper operation is not guaranteed for a one-to-one connection using a crossover
cable.
• Use a network cable that supports the data rate of your network.
IM WT310E-17EN
PC
Network card
UTP or STP cable
(straight cable)
WT310E/WT310EH
RJ-45 modular jack
WT332E/WT333E
4-3
1
2
3
4
5
6
7
8
9
App
Index