Enabling Purchased Software Options; Updating The System Software; Updating The System Software Using A Usb Drive; Downloading The Software And Extracting To A Usb Drive - Viavi ONA-800 Getting Started Manual

Enabling purchased software options

IMPORTANT
Before beginning this procedure, ensure that the USB stick on which software option files are
saved is available.
1 Select System on the menu bar, and then select System Info.
2 Connect the USB stick to a USB port on top panel of the unit.
3 Select Import Options from USB below the Base Options pane.
A confirmation message appears when the options are installed.
4 Restart the instrument, access the System Info tool, and then confirm that each
software option appears in the Base Options pane and is enabled
page

Updating the system software

System software and solution firmware can be updated from storage media, such as a
USB drive, or over the network.
This section describes the following tasks:
• "Updating the system software using a USB drive" on page 23
•
"Updating the system software over the network" on page 25

Updating the system software using a USB drive

Download the system software to a PC and then extract it to a USB drive with at least
1 GB available space. VIAVI recommends that the USB drive have no other content
stored on it.
The update process when using a USB drive involves the following procedures:
• "Downloading the software and extracting to a USB drive" on page 23
• "Performing a software update using a USB drive" on page 24

Downloading the software and extracting to a USB drive

1 Using a Web browser on a personal computer (PC), go to
Updates and
2 Locate and then click the link for the latest version of the self-extracting system
software file for the unit.
3 Save the software file to a location on the PC.
4 Plug a USB drive into the PC.
April 2022
22).
Downloads.
ONA-800 Getting Started Guide
22142812, R011
Chapter 2 Setting up the system

Updating the system software

(Table 9 on
VIAVI Software
Page 23