Table of Contents
Advertisement
Cabinet Layout and
Dimensional Drawings
of Drive
7000 "A" Frame
The following dimension drawing is a sample and may not accurately
detail your drive. It is provided here to give you a general overview
of a typical drive.
The Dimensional Drawings are order specific and will show the
information outlined.
The dimension drawing provides important information for the
installation of the equipment.
The FLOOR PLAN shows:
•
the locations for anchoring the equipment to the floor (balloon D)
•
size and location of openings for bottom power cable entry
(balloons A and B)
•
size and location of openings for bottom control wiring entry
(balloon C)
The ROOF PLAN shows:
•
size and location of openings for top power cable entry (balloons
A and B)
•
size and location of openings for top control wiring entry
(balloon C)
•
minimum aisle clearance in front of equipment (balloon M)
The Front View shows:
•
minimum clearance required at top of drive for fan maintenance
(balloon K)
Drive Installation
2-11
7000A-UM151E-EN-P - October 2018
Advertisement
Table of Contents
