Table of Contents
Advertisement
System Programming
7000 "A" Frame
In order to download a newer version of a language, all languages
in the operator interface must first be cleared (this is a
characteristic of flash memory) by pressing the [F2] key on the
TRANSFER:LANGUAGE screen. The screen as in Figure 3.85
will then ask you to confirm the operation. Press the [F8] key to
proceed, or the [F9] key to abort.
Figure 3.85 – Clear Languages
Pressing the [F5] key may restart an aborted download or one that
failed. To select or enter a different filename, press the [F7] key.
The firmware for the complete drive system may be updated via
serial port #2 on the Customer Interface Board. Pressing the [F9]
key from the transfer screen will place the drive system into
download mode.
Operator Interface
3-63
7000A-UM151E-EN-P - October 2018
Advertisement
Table of Contents
