Table of Contents
Advertisement
2-6
Drive Installation
Installation (cont.)
7000A-UM151E-EN-P - October 2018
Locate the exhaust hood on top of the cabinet per Figure 2.3 and re-
install the original cover plate previously set aside. (Care must be
taken that the notches on the bottom flange are oriented toward the
sides of the drive). Affix assembly to the drive top plate. Tighten all
hardware.
For drives with an acoustic hood (shown in Figure 2.2), locate the
exhaust hood (refer to Figure 2.4).
A T T E N T I O N
A T T E N T I O N
Figure 2.3 – Fan Hood Installation
Any screws that are accidentally dropped in
the equipment must be retrieved as damage
or injury may occur.
Assembled Exhaust Hood
M6 Screw
(Quantity = 12)
Ensure notch
orientation
to sides
7000 "A" Frame
Advertisement
Table of Contents
