Table of Contents
Advertisement
3-68
Operator Interface
PCMCIA Memory Card
Installation Data
7000A-UM151E-EN-P - October 2018
Description
The memory card slides into the card slot located on the backside of
the PowerFlex 7000 drive operator interface. These instructions show
how to insert the card in the Operator interface.
The memory card should be kept free from
W A R N I N G
W A R N I N G
moisture, extreme temperatures, and direct
sunlight. Failure to observe this caution could
result in damage to the card.
Do not subject memory card to flexing or
W A R N I N G
W A R N I N G
extreme shock. Failure to observe this caution
could result in damage to the card.
Installing the Memory Card
1. Locate the vertical card slot on the back of the operator interface.
See Figure 3.88.
COMMUNICATION CABLE
Figure 3.88 – Rear View of Operator Interface
CARD SLOT
7000 "A" Frame
Advertisement
Table of Contents
