Table of Contents
Advertisement
3-20
Operator Interface
7000A-UM151E-EN-P - October 2018
Figure 3.19 – Top Level Meter Modified
Viewing Revision Levels
For the purpose of maintenance or upgrading of software, the
revision levels of all the software contained in the terminal and the
drive may be viewed. To access this screen, press the [F9] key.
A screen typical of Figure 3.20 shows:
–
the type of drive
–
a 16-character, user definable string to uniquely identify a drive
–
revision level of the terminal software and its part number
–
revision level of the bootcode contained in the terminal
–
revision level of various boards contained in the drive
These are identified by name.
Figure 3.20 – Utility Rev Level
To modify the user definable text string, press the [F8] key. (If
nothing happens then you have not gained the required access to
make changes. Exit to the Top Level Menu screen and refer to the
section entitled Enter/Modify an Access Level .)
7000 "A" Frame
Advertisement
Table of Contents
