Table of Contents
Advertisement
Operator Interface
3-31
Figure 3.35 – PIN Change
Enter the current PIN value via the data keys [0]-[9] and press the
[enter] key. As in the ACCESS screen, the entered value is shown via
placeholders and may be edited with the [backspace] key.
If you entered the correct PIN, the screen now asks you for the new
PIN. Type in the new PIN value using the data entry keys [0]-[9]
followed by the [enter] key. The screen now asks you to verify the
new PIN. Type in the new PIN again followed by the [enter] key as
shown in Figure 3.36.
Figure 3.36 – PIN Change Completed
At the end of the operation you will see a status as shown in either
Figures 3.36, 3.37 or 3.38 depending on whether you successfully
changed the PIN, incorrectly entered the existing PIN or incorrectly
verified the new PIN.
7000 "A" Frame
7000A-UM151E-EN-P - October 2018
Advertisement
Table of Contents
