Table of Contents
Advertisement
3-42
Operator Interface
7000A-UM151E-EN-P - October 2018
Figure 3.51 – Fault Mask OFF
Figures 3.50 and 3.51 show all fault masks regardless of their current
state. The fault masks can be viewed according to their state by
pressing the [F7] key on the FAULTS SETUP screen. This will
display the FAULTS OVERVIEW screen, typical of Figures 3.52
and 3.53.
Figure 3.52 – AC O/V, Disabled
Figure 3.53 – Fault Overview, Enabled
The state of the fault masks which you are currently viewing is
defined to the right of the screen name, i.e. FAULTS OVERVIEW:
DISABLED or FAULTS OVERVIEW: ENABLED. To change the
7000 "A" Frame
Advertisement
Table of Contents
