Table of Contents
Advertisement
4-30
Component Definition and Maintenance
Fan Replacement (cont.)
7000A-UM151E-EN-P - October 2018
Top of Integral Line Reactor and Input Starter Section
Figure 4.22 – Starter/Line Reactor Cabinet Fan Removal
1. Remove the top ventilation cover from the exterior of the cabinet.
2. Remove mounting screws and invert fan mounting bracket to expose
fan mounting hardware.
3. Unplug or disconnect fan leads from terminal blocks and replace fan.
4. Reassemble in the reverse order of removal.
Ventilator Cover
Terminal Blocks
Fan Mounting Bracket
Fans
7000 "A" Frame
Advertisement
Table of Contents
