Table of Contents
Advertisement
Operator Interface
3-19
The first character position of the string will be in reverse video as
shown in Figure 3.17. Refer to the section entitled "Edit Text".
Figure 3.17 – Edit the Text
When editing is complete, the screen will appear as in Figure 3.18.
Figure 3.18 – Editing Completed
The operator interface contains a default set of meters. This default
set is selected by pressing the [F2] key any time the 'Meters' screen is
displayed. This results in the default text and tags as shown in
Figure 3.15.
The changes made do not take affect until you press [F10] and exit
the screen. Any time prior to this you may cancel all of the changes
made after coming to the screen by pressing the [F7] key.
The result of selecting the V Line tag for meter 2 (in our example) is
shown in Figure 3.19 after the METERS screen was exited.
7000 "A" Frame
7000A-UM151E-EN-P - October 2018
Advertisement
Table of Contents
