Table of Contents
Advertisement
3-52
Operator Interface
7000A-UM151E-EN-P - October 2018
To assign a tag to the display, use the [cursor up] and [cursor down]
keys to highlight the desired item position and press the [enter] key.
This will begin the selection process of a tag as described in the
section entitled "Select a Parameter". When you have completed
the selection process, the selected tag will be assigned to the item, as
in Figure 3.72. To remove a tag from the highlighted item, press the
[delete] (Backspace) key.
Figure 3.71 – Display Custom Screen
Figure 3.72 – V Line Assigned
The changes take affect immediately, however are not saved until
you press [F10] and exit the screen. Any time prior to this you may
cancel all the changes made after coming to the screen by pressing
the [F7] key.
7000 "A" Frame
Advertisement
Table of Contents
