Table of Contents
Advertisement
3-30
Operator Interface
7000A-UM151E-EN-P - October 2018
Figure 3.33 – Pin Entry
The value may be edited by using the [backspace] key. When the
value has been typed in, press the [enter] key. If the correct PIN was
entered, the access level of the operator interface will change as
shown in Figure 3.34 . If the incorrect value was entered, the
operator interface will remain at the current access level.
Figure 3.34 – Access Level Changed
When the desired operations have been completed, the operator
interface should be placed back to the 'Monitor' level in order to
protect against unauthorized modifications. From this screen press
the [F8] key. The level will change back to 'Monitor' as shown in
Figure 3.32.
The default value for the password (PIN) of the 'Basic' and
'Advanced' levels is zero (0), or simply pressing the [enter] key. This
value can be changed from the ACCESS screen. First use the
up/down cursor keys to select the level for which you wish to modify
the PIN. Press the [F9] key. The typical PASSWORD CHANGE
screen shown in Figure 3.35 is displayed, showing the Access Level
for which the new PIN will be applied to.
7000 "A" Frame
Advertisement
Table of Contents
