Table of Contents
Advertisement
Operator Interface
3-29
associated with Access Levels. Each Access Level, (except for the
first one 'Monitor') has its own password number (PIN). These
values can be unique or all can be set to the same value.
The default level, 'Monitor' does not have a PIN associated with it.
With this Access Level, the drive configuration can be viewed, but
no changes are allowed to the parameters. In addition to providing
the protection, the Access Levels also filter out the amount of
information that can be viewed at each level. On any level, other
than 'Monitor', any information that can be viewed may also be
modified.
The screen shown in Figure 3.32 is accessible from within a number
of screens where the Access Level affects the operation of
subsequent operations, such as:
1) [F10] key on the Top Level Menu,
2) [F8] key on the Modify Parameter screen,
3) [F8] key on the Setup Screen,
4) [F8] key on the Transfer Screen,
5) [F8] key on the Diagnostic Setup screen.
Figure 3.32 – Access Screen
The Current Access level is shown. To select a different access
level, use the up/down cursor keys to select the desired the level.
Then enter the password value (PIN) for that level using the data
entry keys. The value can be any number between 0 and 65535. As
the number is entered via the keys [0]-[9], the value will be shown
by a placeholder (i.e. * in the editing field), as shown in Figure 3.33.
7000 "A" Frame
7000A-UM151E-EN-P - October 2018
Advertisement
Table of Contents
