Table of Contents
Advertisement
2-8
Drive Installation
Installation (cont.)
7000A-UM151E-EN-P - October 2018
Installation of Integral Transformer Cooling Fan
1. Remove the protective plate covering the fan opening on the top
of Isolation Transformer cabinet and discard.
2. Locate the cooling fan on top of the cabinet. Position it over the
opening and align the mounting holes and wire harness
connections.
3. Affix the fan to the drive top plate with the M6 thread forming
screws provided.
4. Connect the fan wire harness to fan.
Figure 2.5 – Fan Installation for Integral Isolation Transformer
Assembled Exhaust Hood
Assembled Exhaust Hood
M6 Screw
M6 Screw
(Qty = 12)
(Qty = 12)
7000 "A" Frame
Advertisement
Table of Contents
