Table of Contents
Advertisement
3-24
Operator Interface
7000A-UM151E-EN-P - October 2018
Selecting via a name is initiated from the SELECT GROUP screen
(Figure 3.23) by pressing the [F7] key. This displays the SELECT
LETTER screen shown in Figure 3.25.
Using the cursor keys, select (i.e. reverse video) the letter with which
the desired tag starts with. The [cursor up] and [cursor down] keys
move vertically within a column, the [cursor left] and [cursor right]
key move laterally within the rows. When the appropriate letter has
been selected, press the [enter] key.
All tags which begin with that letter, and are appropriate for the
operation on which the selection is being performed, will be
displayed as in Figure 3.26. Using the [cursor up] or [cursor down]
keys, and if required the [F8] and [F9] keys to change the page,
select the desired tag. Press the [enter] key and the selected tag will
be used to continue the operation for which the selection process was
being used.
From either of these two screens (SELECT LETTER or SELECT
LIST) you can return directly to the default selection method via
groups by pressing the [F7] key.
Figure 3.25 – Selecting via a Letter (Step 1)
Figure 3.26 – Selecting Name via List (Step 2)
7000 "A" Frame
Advertisement
Table of Contents
