Document Scope; Starter Identification - Allen-Bradley 1512B User Manual

Document Scope

Starter Identification

General Information
This User Manual pertains to the Rockwell Automation Bulletin 1512B medium
voltage controller. The Bulletin 1512B structure includes provisions for two
complete MV controller units.
The installation section provides instructions for both the standard enclosure
type and Rockwell Automation arc resistant type (ArcShield).
The product Bulletin numbers covered by this document are:
• 1512B 200/400 A
• 1512BT 200/400 A
• 1512BP 200/400 A
This document is to be used for all Bulletin 1512B unit types, including arc
IMPORTANT
resistant (ArcShield™) units. Important information specifically for ArcShield
units can be found in
ATTENTION: Users must refer to the information in
and Appendix C
Failure to do so may negate the arc resistant benefits provided by ArcShield,
exposing personnel to risk of serious injury or death.
This document may also be used as a reference guide for the following Bulletin
numbers:
• 1512DM 200/400 A
• 1512DO 200/400 A
• 1512M 200/400 A
• 1562E 200/400 A
(up to 4800V) Reduced Voltage Starter
• 1591B Incoming Line Unit
• 1592BF Fused Load Break Switch for Feeders
• 1592BP Fused Load Break Switch for Feeders, prepared space
A structure nameplate is attached to the right-side flange of the structure (see
Figure 1). Refer to the nameplate for information such as series number, section
number, NEMA enclosure type, unit ratings and bus ratings.
(1) Not available on arc-resistant designs.
Rockwell Automation Publication 1500-UM055H-EN-P - February 2015
FVNR controller
Transformer Feeder
(1)
Prepared Space
Appendix A, Appendix B
to correctly install and maintain ArcShield arc resistant units.
VFD Input Contactor Units
VFD Output Contactor units
VFD Output Bypass Starter
MV SMC Flex Solid-State
1
Chapter
and Appendix C.
Appendix A, Appendix B
9