Powercam Secondary Break-Out Cable - Polycom VSX Series Integrator's Reference Manual

PowerCam Secondary Break-Out Cable

Description
8-pin mini-DIN to 3-way
breakout block
8 7
5
2
J2
8 Pin
Mini Din
Female
Mounting Hole
MH10
MH11
© Polycom, Inc.
This cable connects S-video and secondary control cables and a power supply to a
PowerCam camera. This combination is required to use a PowerCam as either the
primary or secondary camera for distances more than 10 ft away.
Used With
VSX 7000 (use with
S-video cable and
PTZ cable,
2457-21712-001)
VSX 8000 (use with
control cable
1457-50527-001
and S-Video cable)
Separate power
supply required
(part number
300-0013-01)
Molded PVC strain relief
6
4 3
4 3
2 1
1
P1 J1
4 Pin
DC
Mini Din
Jack
Female
Molded Signal Name
Conn.Pin
MH6 J2.5 VCS TXD / CAM RXD
MH8 J2.3 VCS RXD / CAM TXD
J 2.6&4 GND
P1.1
J 2.6&4 GND
P1.1
MH5 J 2.7 IR_SIG
MH4 J1.1 Chroma Return
MH1 J1.2 Luma Return
MH3 J1.3 Luma (Y)
MH7 P1.2 +12V
MH9 P 1.2 +12V
MH2 J1.4 Chroma (C)
J2 SHIELD
This drawing is provided for design reference only. Polycom claims no responsibility or
liability for the quality, performance and/or reliability of cables based on this reference
drawing. Cables are available from Polycom that meet the appropriate manufacturing
tolerances, quality and performance parameters.
Part Number
1457-50526-001
P2
6' ± 2.0"
Wire Type P2 Pin #
30 AWG wire
30 AWG wire
2 2 AWG wire
2 2 AWG wire
30 AWG wire
Coax Shield
Coax Shield
Micro Coax
22 AWG wire
22 AWG wire
Micro Coax
DRAIN wire SHIELD
Chapter 1 - Cables
Length
Shipped Length: 6 ft (1.8 m)
8 Pin Mini Din
Male
Signal Name
1 TXD
2 RXD
3 DGND
3 DGND
4 IR-SIGNAL
5 AGND
5 AGND
6 Luma
7 +12V
7 +12V
8 Chroma
1 - 17