Powercam Break-Out Cable - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

PowerCam Break-Out Cable

This cable connects S-Video and control cables and a power supply to a Polycom PowerCam camera. This
combination is required when using the PowerCam as the primary camera more than 10 ft away from the
system, or as the secondary camera. It is 8-pin mini-DIN to 3-way breakout block.
A separate power supply is required (part number 1465-52621-036).
Length
6 ft (1.8 m)
Polycom, Inc.
Part Number
2457-50526-200
8 7 6 4 3
5 4 3
2 1
1
2
P1
J2 J1
4 Pin
8 Pin DC
Mini Di n
Mini D i n Ja ck
Femal e
Fe ma le
Signal Name Signal Name
TXD TXD
RXD RXD
DGND DGND
IR-SIGNAL IR-SIGNAL
CHROMAR CHROMAR
LUMAR LUMAR
LUMA (Y) LUMA (Y)
+12V +12V
CHROMA (C) CHROMA (C)
SHIELD SHIELD
Drawings and part numbers are provided for reference only. Polycom claims no
responsibility or liability for the quality, performance, or reliability of cables based on
these reference drawings, other than cables provided by Polycom. Contact your
Polycom distributor or Polycom Custom/Vertical Products to order cables that meet
the appropriate manufacturing tolerances, quality, and performance parameters for
your application.
RoHS Compliant
Yes
Molded PVC strain relief
6' ± 2. 0"
CONNECTION TABLE CONNECTION TABLE
P1 P1 P2 P2
J1 J1
1 1
2 2
1 1 3 3
4 4
5 5 1 1
2 2
5 5
3 3
6 6
2 2 7 7
8 8 4 4
Shield Shield
Cables
P2
8 P i n M i n i Din
Ma le
J2 J2
5 5
3 3
6 & 4 6 & 4
7 7
Shield Shield
69