Contents and general instructions
Intended use
VI
The bus node CPX-FB14 described in this description has
been designed exclusively for use as a participant on the
CANopen fieldbus.
The CPX terminal must only be used as follows:
–
As intended in industrial environments;
outside of industrial environments, e.g. in commercial and
mixed-residential areas, actions to suppress interference
may have to be taken
–
in original status without unauthorised modifications;
only the conversions or modifications described in the
documentation supplied with the product are permitted.
–
in excellent technical condition.
The limit values specified for pressures, temperatures, elec
trical data, torques etc. must be observed.
Comply with the legal rules and regulations and standards,
rules of the testing organisations and insurance companies
and national specifications applicable for the location.
Warning
Use only PELV circuits for the electrical power supply in
accordance with IEC/EN 60204-1 (Protective Extra-Low
Voltage, PELV).
Observe also the general requirements for PELV circuits
in accordance with IEC/EN 60204-1.
Use only voltage sources that ensure a reliable electric
separation of operating voltage in accordance with
IEC/EN 60204-1.
Always connect both circuits for operating and load
voltage supply.
Festo P.BE-FB14-EN en 1411d English