Table of Contents
Advertisement
Additional information
2
Safety
2.1
Safety instructions
– Only use the product if it is in perfect technical condition.
– Observe the identifications on the product.
– Store the product in a dry environment protected from UV and corrosion. Keep storage times short.
– Before working on the product, switch off the power supply and secure it against being switched on
again.
2.2
Intended use
The product described in this document is intended only for use in an automation system CPX-AP-A.
Use the product only as follows:
– Use only in an industrial environment. Outside industrial environments, e.g. in commercial and
residential/mixed-use areas, it may be necessary to take measures to suppress radio interference.
– Use only in combination with modules and components that are approved for the applicable
product variant è www.festo.com/catalogue.
2.3
Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can evaluate the work
and detect dangers. The qualified personnel have skills and experience in dealing with electrical
(open-loop) control technology.
3
Additional information
– Contact the regional Festo contact if you have technical problems è www.festo.com.
– Accessories and spare parts è www.festo.com/catalogue.
Festo — CPX-AP-A-8DO-M12-5P — 2022-07
5
Advertisement
Table of Contents
