Festo CPX-FB14 Description page 63

2. Commissioning
COB-ID Command
0x7E5 Byte 0
Data 0x17
Tab. 2/14: Store configuration
COB-ID Acknowledge
0x7E4 Byte 0
Data 0x17
Tab. 2/15: Answer to store configuration
Error code:
– 0 Successful saving of the settings
– 1 Saving is not supported by the LSS slave.
– 2 No access to the storage medium.
– 0xFF Not all switch elements 1 ... 7 of the DIP switch 3 are at OFF. The bus node
is not in the LSS mode.
Error extension:
– Reserved
Festo P.BE-FB14-EN en 1411d English
Save the configuration
With the "store configuration" command, the new node ID
and the new baud rate are stored.
This command is only possible in the configuration mode.
1 2
0x00 0x00
1 2
Error code Error ex­
tension
3 4 5
0x00 0x00 0x00
3 4 5
0x00 0x00 0x00
6 7
0x00 0x00
6 7
0x00 0x00
2-15