Festo CPX-FB14 Description page 46

1. Installation
1-32
Screw terminal adapter (IP20)
With this adapter the bus is connected to a 2x5-pin terminal
strip. Use the second row of connections for the continuing
fieldbus.
The maximum permissible current at the clamps is 4 A. Use
cables with a minimum cross-section of 0.34 mm
Order this connection from Festo (FBA-1-SL-5POL) together
with the terminal strip type FBSD-KL-2x5POL.
Screw terminal
adapter
1 2 3 4 5
Fig. 1/9: Pin assignment of the fieldbus interface
(5-pin screw terminal adapter)
If you connect the fieldbus via the terminal strip
FBSD-KL-2x5POL from Festo, you can implement a T-adapter
function.
Pin no.
1. 0 V bus
2. CAN_L
3. Screening
4. CAN_H
5. 24 V DC bus (max. 4 A)
2x5-pin terminal strip
Festo P.BE-FB14-EN en 1411d English
2
.