Applicable Documents; Specified Standards; Safety; Safety Instructions - Festo MS6-SV D-10V24 Series Instructions Manual

Applicable documents

1 Applicable documents
All available documents for the product è www.festo.com/pk.
1.1

Specified standards

Version
2006/42/EG
EN 1037 + A1:2008-04
EN ISO 4414:2010-11
EN ISO 13849-1:2015-12
EN ISO 13849-2:2012-10
Tab. 1 Standards/directives specified in the document
2

Safety

2.1

Safety instructions

– Only use the product in original status without unauthorised modifications.
– Only use the product if it is in perfect technical condition.
– Observe labelling on the product.
– Take into consideration the ambient conditions at the location of use.
– Prior to mounting, installation and maintenance work: Switch off power supply and secure it from
being switched back on.
– Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
2.2

Intended use

The product is intended solely for venting quickly and safely and for building up pressure gently in
pneumatic piping systems and terminal equipment in industry.
The product is intended for installation in a machine or automated system and must be used exclus-
ively as follows:
– In an industrial environment
– Within the limits of the product defined by the technical data è 14 Technical data.
– In its original condition, without unauthorised modifications
– In perfect technical condition
– In standard operation, which includes standstill, set-up and service operation, as well as emer-
gency operation
4 Festo — MS6-SV-...-D-10V24 — 2019-05b