1. Installation
M12 adapter
2
3
1
1
5
4
Bus IN
Fig. 1/8: Pin assignment of the fieldbus interface (adapter for 5-pin M12 connection)
Festo P.BE-FB14-EN en 1411d English
M12 adapter (IP65)
With this adapter the bus is connected via a 5-pin M12 socket
with PG9 fitting. Use the second connection socket for
continuation of the fieldbus.
Note
Use protective caps to seal unused connections.
You will then achieve protection class IP65.
Order this connection from Festo (FBA-2-M12-5POL).
2
3
5
4
Bus OUT
Protective cap or plug with bus termination
resistor if connection is not used.
With the two M12 connections, you can implement a
T-adapter (è Fig. 1/6).
Pin no.
1. Screening
2. 24 V DC bus (max. 4 A)
3. 0 V bus
4. CAN_H
5. CAN_L
1-31