Safety Switch Continuity - Kubota B2410 Workshop Manual

9 ELECTRICAL SYSTEM
(4) Safety Switch
82410 • 82710 • 82910 WSM, 12271
Safety Switch Continuity
1. Remove the safety switch leads.
2. Connect the circuit tester to the safety switch leads.
3. Measure the resistance between leads.
4. If the safety switch is defective, replace it.
Resistance (Across
When switch push is
o
ohm
pushed
switch terminal) of (1),
When switch push is
(2) and (4)
released
Infinity
When switch push is
Infinity
Resistance (Across
pushed
switch terminal) of (3)
When switch push is
o
ohm
released
(1) Safety Switch for Clutch Pedal
(2) Safety Switch for PTO Gear Shift
Lever
9-S10
(3) Safety Switch for Range Gear Shift
Lever(Only 82710 Affected Serial
No.: below 15496)
(4) Safety Switch for HST
12271890040