Cooling System; Coolant Check/Replenish - Rotax 912 iSc Maintenance Manual

3) Cooling system

3.1)

Coolant check/replenish

General note
Special tools
ENVIRONMENT NOTE
Coolant and mixtures of coolant and water have to be treated as
hazardous waste!
For accomplishment the following special tool is required.
n.a.
n.a.
Special tool
Graphic
Fig. 2
See
Instruction
To refill the coolant the following steps are necessary.
Step
1
2
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Risk of Burns!
WARNING WARNUNG
Hot engine parts!
Always allow engine to cool down to ambient temper-
ature before start of any work.
Risk of Burns!
WARNING WARNUNG
Never open the radiator cap when the cooling system
is hot. For safety's sake, cover cap with a rag and
open slowly. Sudden opening of the cap could pro-
voke the escape of boiling coolant and result in scald-
ing.
Part number
(1) Densimeter
(2) Glycol tester
1
Fig. 3.
Open the radiator cap (1) on the expansion tank (2).
Check the coolant level. The coolant level must be filled up to the top (see
Sketch).
Description
Procedure
12-10-00
2
05908,05909
page 7
January 01/2012