Table of Contents
Advertisement
12.5.14 Monitor Active
The Monitor function sends the voice data of ongoing calls over the
network to a PC that has registered the recorder within the RTR Call
Monitor software.
Monitor active:
NEXT
• Press CHANGE
CHANGE
CHANGE to enable the Monitor function for the Single II.
CHANGE
Monitor pwd: 1
Use the numerical keys to enter the Ftp user name. Use the
switch between upper case and lower case characters. Press he numerical
keys once for a, twice for b etc.
Monitor
Monitor is the last menu item in the Network Settings.
Monitor
Monitor
• Press BACK
BACK
BACK
BACK to exit
• Press STOP
STOP to exit the Network settings menu.
STOP
STOP
You will be prompted to SAVE or CANCEL changes made.
12.6 Clock
Clock:
NEXT
• Press CHANGE
CHANGE
CHANGE to set the clock
CHANGE
Clock:
STORE
70
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
CHANGE
Mon 01-08-14 11:54
CHANGE
Mon 01-08-14 11:54
<<
>>
No
BACK
BACK
STOP
CANCEL
to
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated