Table of Contents
Advertisement
Instead of pushing the hook-control function key
It is also possible to start a call from the Telephone book. See § 9.3
7.4 Accept a call
When the phone is ringing
Monday
Telephone ringing
The Single II will keep track of the number of rings that have passed and
shows it in the display.
Push the hook-control function key
•
pick up the handset.
The speakerphone key can also be used to accept the call.
7.5 End a call
A call is ended by putting the handset back on the Single II, pushing the
hook-control function key
when the speakerphone was used.
Manual Call Recorder Single II © 2011-2014 Vidicode®
01-08-14 11:24
or by pressing the speakerphone key
.
1x
to accept the call, or
35
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated