Table of Contents
Advertisement
The setup of Voice Activated Recording is all about finding the correct
level for the Start and Stop levels and a comfortable time for the Silence
timeout. These settings can vary substantially between different
situations and are subject to personal preferences.
Voice activated recording can also be used for making microphone
recordings, for instance during the recording of meetings.
4.3 Recording from the microphone
The Single II has two different microphone options to record from. An
internal microphone that is used for the Speakerphone function, the
other is the microphone port to which an external microphone can be
connected. See § 12.4.11 through § 12.4.13 for details about the
settings.
A quick microphone recording can be started when the telephone is
idle.
• Press the Rec
Rec.
Rec
Rec
time.
Recording Microphone!
03-07 16:15 0:00:15
The display will indicate that a microphone recording is taking place.
• Press the Stop
Code = ________________
STORE
• Enter a Code to store with the recording
• Press STORE
STORE to store the recording
STORE
STORE
For regular or automatic recording from a microphone the recording
source can be set to Microphone. For Start method the same options are
available as for "Handset" recording source. See § 4.2.1 for details.
Manual Call Recorder Single II © 2011-2014 Vidicode®
key and the Play/Pause
key to stop the recording.
key at the same
DELETE
27
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated