Start:
NEXT
• Press CHANGE
CHANGE
CHANGE
CHANGE to select "Voice activated".
Other Start Method options are:
• Close Contact
• Manually (for manual recording)
Some digital phone systems have a contact switch which breaks or
makes contact when the phone is taken Off Hook. The making or
breaking contact is used by the Call Recorder to Start or Stop a
recording. Close Contact
Close Contact
Close Contact can be selected if the digital phone system is
Close Contact
equipped with a Contact connecting.
4.2.2
Voice activated recording
The principle behind voice activated recording is quite simple. When the
Single II detects a "certain" amount of audio signal on the handset it
will assume a call is taking place. The "certain" amount is a level that
can be set in the Signal settings (§ 12.4.7). This level is called the Start-
level.
4.2.3
Set Start level, stop level and Silence Timeout
The Start
Start-level determines the level above which the Single II will
Start
Start
assume a call is taking place and start recording. More or less the same
principle applies to the stopping of the recording.
When the Single II detects that the audio level falls below the set Stop
level (§ 12.4.7) the Single II will assume the call has ended
level
level
level
The Silence
Silence timeout
timeout is a period of time in seconds that prevents a
Silence
Silence
timeout
timeout
premature stop when the audio level drops below the Stop level. The
recording will be stopped only if the audio level remains below the Stop
level for the time of the set Silence timeout.
Now when a silence occurs in a call the recording continues for at least
the Silence timeout. If during the recording in the Silence timeout
period the audio level exceeds the Stop level again the recording will
continue. When a call has ended the audio level will drop below the
Stop level and the recording will be stopped after the Silence timeout
has passed.
26
Manual Call Recorder Single II © 2011-2014 Vidicode®
Voice activated
CHANGE
STOP
Stop
Stop
Stop
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated