Table of Contents
Advertisement
5 Search and play recordings
The Single II has three different kinds of recordings. They are:
-
Call recordings,
-
Microphone recordings,
-
Answering machine messages.
Search and playback of these recordings is initiated with the
corresponding function keys. Each recording type has its own Search and
playback function key.
The search and playback menus and operation for the different
recordings are virtually the same.
Recordings can be searched for according to Date and Code.
For all recordings the date of the recording is stored with the recording.
The Code of a recording can be addressed when storing the recording.
By default the dialled number or the caller ID is used as Code of a
recording.
When a search is started one has to choose between searching the SD
card or the Disk. Searching the SD or the Disk is done in exactly the same
way.
During the search the
wildcard is default used for the Code search string. This way the search is
performed on Date and time only. In the next paragraphs the searching
for the various recordings is described.
28
character can be used as a wildcard. The
Manual Call Recorder Single II © 2011-2014 Vidicode®
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated