Table of Contents
Advertisement
12.5.10 IP name
Aside from the IP address the Single II can also be addressed by an IP
name if this function is supported by your DNS server.
IP name: AM3-00041
NEXT
• Press CHANGE
CHANGE to enter an IP name for the Single II.
CHANGE
CHANGE
IP name: 2
STORE
Use the numerical keys to enter the Ftp user name. Use the
switch between upper case and lower case characters. Press he numerical
keys once for a, twice for b etc.
• Press STORE
STORE to save an IP name for the Single II.
STORE
STORE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.11 NTP server
If an NTP (Network Time Protocol) server is used on the network the NTP
server functionality can be enabled. The Call Recorder can acquire the
correct time from the Network Time Server.
NTP srv: 0.0.0.0
NEXT
• Press CHANGE
CHANGE to enter the NTP server address.
CHANGE
CHANGE
NTP srv: 0.0.0.0 2
STORE
Use the numerical keys to enter the NTP server address.
• Press STORE
STORE to save the NTP server address.
STORE
STORE
68
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
CANCEL
CHANGE
CLEAR
CANCEL
BACK
BACK
to
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated