Table of Contents
Advertisement
FTP active:
NEXT
• Press CHANGE
CHANGE
CHANGE
CHANGE to enable FTP.
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.3
FTP user
The Ftp user is user name of the Single II. It is used by the Archive
software to log on to the Single II.
FTP user: 0000
NEXT
• Press CHANGE
CHANGE to change the Ftp user name.
CHANGE
CHANGE
FTP user: 2
STORE
Use the numerical keys to enter the Ftp user name. Use the
switch between upper case and lower case characters. Press he numerical
keys once for a, twice for b etc.
• Press STORE to save the Ftp user name.
• Press NEXT to move on to the next menu item.
12.5.4
FTP password
The Ftp password of the Single II is the password that goes with the FTP
user name of the Single II. It is used by the Archive software to log on to
the Single II.
FTP pwd: 0000
NEXT
64
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
CHANGE
CLEAR CANCEL
CHANGE
No
BACK
BACK
BACK
to
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated