Table of Contents
Advertisement
8 Single II as Answering machine
The Single II has a simple answering machine function with the
possibility for 30 different welcome messages.
NOTE: Answering machine can only be used when the Single II is
NOTE
NOTE
NOTE
connected to the Line. When recording from handset the
answering machine function can not be enabled.
Settings include:
-
Number of rings to answer on. This is the number of rings before
the Single II answers the phone
-
Number of rings to always answer. This is the number of rings
before the Single II answers the phone when the Answering
Machine was turned Off. Hereafter the answering machine stays
turned on.
-
Enable speaker after answer. This function turns the speaker on
when the Single II answers an incoming call. The playing of the
welcome message and the caller leaving a message can now be
heard through the speaker.
-
Maximum message time. This function restricts the duration of the
messages.
When new messages have been left on the machine the display will
indicate so. When messages have been listened to the Single II will
prompt you whether or not to save the messages. For playback of the
stored messages see § 8.4.
8.1 Turn the answering machine On / Off
When the Single II is idle the answering machine can be turned on
without entering the settings menu.
Wednesday
Call Recorder
36
Manual Call Recorder Single II © 2011-2014 Vidicode®
03-07-14 16:15
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated