Using The Cryptocard; Insert Cryptocard Into Single Ii; The Cryptocard And Its Pin And Puc Code - Vidicode Call Recorder Single II Manual

Hide thumbs Also See for Call Recorder Single II:
Table of Contents

Advertisement

10 Using the CryptoCard

Encrypting recordings is done to prevent unauthorized playback of and
listening to recordings. The Single II uses a CryptoCard to encrypt
recordings. The CryptoCard is a chip card that holds the key to the
encryption and decryption. Encrypted recordings can only be played
back together with the original or a matching CryptoCard. Crypto Cards
are available trough your supplier.
The Single II is equipped with a card reader specifically for this purpose;
it is located on the front side of the device. The use of the CryptoCard is
enabled by default inserting a CryptoCard.

10.1 Insert CryptoCard into Single II

Insert the CryptoCard into the Single II as shown in the figure.

10.2 The CryptoCard and its PIN and PUC code

The CryptoCard is supplied with a PIN code and a PUC code. The PIN
code is a four-digit code and is requested by the Single II to enable
playback of recordings. The PUC code is a twelve-digit code and is used
only when the card has been disabled. The PIN code can be changed on
the Single II. See § 12.4.1.
A CryptoCard allows for two invalid PIN code entries. After the third
invalid Pin code entry the CryptoCard is disabled. The next time the
Manual Call Recorder Single II © 2011-2014 Vidicode®
45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Call Recorder Single II and is the answer not in the manual?

Questions and answers

Stella Teo
January 23, 2025

we try call in but caller number no appear

User image 6791efef52f82
1 comments:
Mr. Anderson
February 10, 2025

The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:

1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.

Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.

This answer is automatically generated

This manual is also suitable for:

Single ii

Table of Contents