Table of Contents
Advertisement
Once a correct setting for the Start and Stop level has been found the
Silence timeout can be raised. A comfortable setting would be a time of
20 - 30 seconds. This will lift the recording over most silences in
telephone calls and will hardly join two consecutive calls into a single
recording.
12.4.8
Start Period
The Start period setting will only appear when Voice activated recording
is enabled. The Start period is described in § 4.2.2.
Start period:
NEXT
Press + + + + or – – – – to increase or decrease the value.
•
Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
•
12.4.9
Silence period
The Silence period setting will only appear when Voice activated
recording is enabled. The Silence period is described in § 4.2.2.
Silence period:
NEXT
Press + + + + or – – – – to increase or decrease the value.
•
Press NEXT
NEXT
NEXT to move on to the next menu item.
NEXT
•
12.4.10 Compression
The effect Compression
Compression has on the amount of disk space used per
Compression
Compression
recording is described in § 3.3
Compression:
NEXT
• Press CHANGE
CHANGE to select On or Off.
CHANGE
CHANGE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
Manual Call Recorder Single II © 2011-2014 Vidicode®
- CHANGE +
- CHANGE +
CHANGE
100ms
BACK
10s
BACK
Off
BACK
61
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated