Table of Contents
Advertisement
• Press CHANGE
CHANGE
CHANGE
CHANGE to change the Ftp password.
FTP pwd: 2
STORE
Use the numerical keys to enter the Ftp user name. Use the
switch between upper case and lower case characters. Press he numerical
keys once for a, twice for b etc.
• Press STORE
STORE to save the Ftp password.
STORE
STORE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.5
FTP server port
Ftp server port is the port number through which the Archive software
can log on to the Single II. The Ftp server port is default set to 21, as is
the setting of the port number in the Archive software. If there is no
direct reason to change the Ftp server port it is best left unchanged.
FTP server port: 21
NEXT
• Press CHANGE
CHANGE to change the Ftp server port number.
CHANGE
CHANGE
FTP server port: 2
STORE
Use the numerical keys to enter the Ftp server port number.
• Press STORE
STORE to save the Ftp server port number.
STORE
STORE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.6
DHCP server
If a DHCP ( Dynamic Host Configuration Protocol) server is used on the
network the DHCP server functionality can be enabled, if not the DHCP
server must be disabled. A router as used in a small office often behaves
like a DHCP server.
Manual Call Recorder Single II © 2011-2014 Vidicode®
CLEAR CANCEL
CHANGE
CLEAR CANCEL
BACK
to
65
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated