Table of Contents
Advertisement
New Card Code:
STORE
• Enter a numerical code and press STORE.
Repeat Card Code: a
STORE
• Repeat the code and press STORE
Crypto Card:
NEXT
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.4.2
Automatic SD Copy
The Automatic
Automatic SD
Automatic
Automatic
SD
SD copy
SD
Auto copy to SD Card:
NEXT
• Press CHANGE
CHANGE
CHANGE to enable or disable Automatic SD copy.
CHANGE
• Press NEXT
NEXT
NEXT to move on to the next menu item.
NEXT
12.4.3
Notification
The Notification
Notification is described in § 3.2.
Notification
Notification
The Notification options are:
- Off
- Tone
- Message
- Tone + Message
Manual Call Recorder Single II © 2011-2014 Vidicode®
a
STORE again to store the code.
STORE
STORE
CHANGE
copy is described in § 6.
copy
copy
CHANGE
CANCEL
STORE.
STORE.
STORE.
CANCEL
On
BACK
Off
BACK
57
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated