Table of Contents
Advertisement
12.4 Recorder Settings
Recorder Settings
NEXT
MENU
• Press MENU
MENU
MENU
MENU to enter the Recorder Settings menu.
12.4.1
CryptoCard
The CryptoCard function is used to encrypt recordings. Encryption is
described in Chapter 10.
The CryptoCard is the first item in the Recorder Settings.
Crypto Card:
NEXT
• Press CHANGE
CHANGE
CHANGE
CHANGE to enable or disable the CryptoCard function.
Only in case a CryptoCard is inserted the personal code of the card can
be set or changed.
Insert your CryptoCard and press NEXT
card.
Change Card Code
NEXT
• Press CHANGE
CHANGE to change Card code.
CHANGE
CHANGE
Card Code:
STORE
• First enter the original code of the card and press CONTINUE
56
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
NEXT to set the personal code of your
NEXT
NEXT
CHANGE
a
STOP
Off
BACK
BACK
CANCEL
CONTINUE.
CONTINUE
CONTINUE
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated