Page 1
NOTE: The SD card must be formatted with the FAT32 file system. Cards above 32 GB (up to 2 TB) are not tested and must be formatted as FAT32 first, before inserting them into the V-Mic. BOX CONTENT & DOWNLOADS •...
Page 2
HARDWARE INSTALLATION SETUP THROUGH THE WEB INTERFACE The V-Mic can be connected to the LAN with a cable or by using Wi-Fi (see manual). There are two ways to access the web interface of the V-Mic: 1) Start a browser and enter in the address line http://vmicXXXXXX.local...
Page 3
To setup V-Archive to receive data from the V-Tap, go to Options, Setup, Recording tab, and enable V-Tap connections: NOTE1: The PC’s IP address must be entered as the “External Storage IP Address” in the V-Mic unit. NOTE2: The PC’s firewall must be open for TCP port 2016. The installer will try to do this automatically.
Page 4
“External Storage TCP Port”. During installation of V-Archive this port is automatically opened, if permitted by the PC. 7) To see if the PC receives something from the V-Mic, it is possible to make a network trace for test purposes.
Need help?
Do you have a question about the V-Mic and is the answer not in the manual?
Questions and answers