Service Timer; Monitor Active - Vidicode Octo Manual

GMT correction:
NEXT
Send Start Time.
Press CHANGE to set GMT correction. Keep pressing CHANGE to
•
increase the correction. It will start with + 1:00, keep pressing
CHANGE to increase. After + 15:00 there will appear - 15:00.
• Press NEXT to save and move on to the next menu item.
GMT correction refers to Winter time. Summer time and Winter time are
corrected automatically.

11.21 Service timer

The Service timer determines the performance of the network connection.
Default the Service timer is set to Automatic. Changing the setting should
only be done when advised by a service engineer to solve problems.
Service timer:
NEXT
Set the Service timer
• Press CHANGE to change the Service timer.
The following settings are available:
S1-S5, F1-F3 and U1-U3. Where S stands for Slow, F for Fast and U for
Ultrafast.
• Press NEXT to save and move on to the next menu item.

11.22 Monitor active

The monitor function allows you to listen in to the conversations that take
place with the Call Recorder. This is done with the RTR Call Monitor
software, which connects with the Call Recorder over the network. This
option enables this recorder to be accessible to the RTR Call Monitor
software.
68
00:00
CHANGE STOP
Auto
CHANGE STOP
Call Recorder manual © Vidicode 2005