Table of Contents
Advertisement
12.4.11 Microphone mode
The Microphone mode
Microphone mode options are:
Microphone mode
Microphone mode
- Internal
- External
Microphone mode:
NEXT
• Press CHANGE
CHANGE to select the desired Microphone
CHANGE
CHANGE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.4.12 Microphone amplification
The Microphone amplification
Microphone amplification
Microphone amplification determines the amplification of the
Microphone amplification
microphone signal, where 1 is the lowest and 4 is the highest:
Mic. amplification:
NEXT
• Press CHANGE
CHANGE to adjust the Microphone amplification
CHANGE
CHANGE
• Press NEXT
NEXT
NEXT
NEXT to move on to the next menu item.
12.4.13 Automatic Gain Control
The Automatic Gain control
Automatic Gain control function is described in § 3.5.
Automatic Gain control
Automatic Gain control
Auto. Gain control:
NEXT
• Press CHANGE
CHANGE to enable Automatic Gain control
CHANGE
CHANGE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.4.14 Footswitch
The Footswitch
Footswitch
Footswitch
Footswitch function allows you to use a footswitch for playback of
recordings.
62
Manual Call Recorder Single II © 2011-2014 Vidicode®
Internal
CHANGE
Microphone mode
Microphone
Microphone
CHANGE
Microphone amplification.
Microphone amplification
Microphone amplification
CHANGE
Automatic Gain control.
Automatic Gain control
Automatic Gain control
BACK
mode.
mode
mode
4
BACK
On
BACK
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated